Evolution Express Set Includes:

The DT602 Advanced Super Throttle & DCS210+ Advanced Command Station Offers

Works with compatible LocoNet systems
Color 2.4” LCD Display Screen
Advanced menu system and displays
Built-in scrolling help and prompting
Soft ON/OFF switch, with zero OFF power-drain
Advanced display Power Saving for longer wireless battery operation
No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells!
Can use recharged AA batteries
Available in standard tethered or Radio Duplex
Duplex Scan for available Networks and radio signal strength. Run without cords!
All throttles come with a LocoNet cord that can be unplugged, and is replaceable
Dual throttle controls let you control two locos simultaneously
Run locomotives with “encoder click” knobs for both speed and direction control
Full numeric keypad makes loco selection simple
Control light and sound effects functions with the press of a button
Control 29 functions (F0-F28).
Function active/inactive indicators
Convenient step-by-step throttle option set up
Supports simplified decoder programming
Simplified 2 or 4 digit addressing setup
Over 9,000 locomotive decoder addresses
Supports turnout and stationary decoder control
Over 2000 turnout decoder addresses
Fast clock display
Recall feature
Advanced Route editor
USB Interface

Big System Capacity for Big Layouts

Over 9000 Locomotive Addresses

Address 00 for operation of one loco or MU consist without decoders
Two Digit Addressing is easy to use. (Address 01-127)
Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)

5 or 8 Amps of Power to Run More Trains

Function Control

Control 29 functions (F0-F28).
Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).

Two DCC Outputs are Better than One!

Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
Use one output for a braking section while the other runs the layout.

Decoder Programming

Built in read/write programmer lets you program and read back CV values.
Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming

Consisting

Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.
Advanced consisting and Basic consisting, too!
Nested consisting where consists can be consisted together.

Stationary Decoders, Turnout Control & Turnout Position Reporting

Digitrax LNC81 8 Ft. LocoNet Cable 1 Pk.

$5.00