Digitrax DH166D 1.5 Amp HO Scale Wired Mobile Decoder

.672” x 1.074” x .259”
17.08mm x 27.28mm x 6.6mm
Digitrax Easy Connect 9 Pin Harness
1.5 Amp/2 Amp Peak Current Rating
6 FX³ Functions, 0.5 Amp Total Function Current Rating
Fits many HO locomotives

▪FX³ Function outputs for prototypical lighting effects and on/off control:
     Constant Brightness Lighting with directional or independent control.
     Realistic Effects like Ditch lights, Mars lights, strobes, and many more
     FX³ & Standard Function Qualifiers operate functions based on direction,
     F0 on or off, direction and F0, and whether loco is moving.
     FX3 effects optimized for selectable LED or lamp operation
     Configurable FX³ Pulse Function available on all function outputs.
     Function Remapping for custom function setup.
     Master Light Switch turns off all lights & functions with one keystroke.
     Advanced Consist Function Controls
▪Digitrax LocoMotion^® System-Your locomotives look like the real thing.
     The Digitrax LocoMotion System makes them run like the real thing, too!
     Torque Compensation for smooth as silk silent operation.
     128 Speed Step operation (14 or 28 steps can also be used).
     Momentum with acceleration and deceleration.
     Normal Direction of Travel is user selectable.
     Switching Speed feature for easier and faster access to yard speeds.
     3 Step Speed Tables set start, mid and max voltage for custom control.
     28 Step Speed Tables with 256 level resolution for precise control.
▪Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
▪Series 6 Decoder Features.
▪2 Digit and 4 Digit Addressing.
▪Basic, Advanced & UniVersal Consisting.
▪SuperSonic motor drive for silent operation.
▪Scaleable Speed Stabilization ( Back EMF) for smooth speed control.
▪Direct mode programming.
▪Decoder Reset CV with or without speed table reset.
▪Transponder Equipped ready for transponding on your Layout.
▪Motor Isolation Protection helps prevent damage to your decoder.
▪DCC Compatible.
▪FCC Part 15, Class B RFI compliant.
▪Digitrax “No Worries” Warranty.

Specifications:
Current Rating-Motor	1.5/2.0 Ampx Max
Size	.672” x 1.074” x .259” (17.08mm x 27.28mm x 6.6mm)
Installation	Digitrax 9 pin to wires
Function Outputs	6 function decoders support F0 Forward and F0 Reverse, F1, F2, F3 & F4. This allows for reversing headlights and for four separate functions. or 6 separate functions if automatic reversing headlights are not used. In most cases, these decoders do not have wires attached for all functions. Instead they have solder pads that allow the user to attach function wires during installation. Most Board Replacement decoders have LEDs for forward and revese lights wired to F0 Forward and F0 Reverse. They have solder pads for additional functions that must be wired by the end user.
Function Type	Digitrax Real FX³ Turn functions on and off. Head lights and tail lights are automatically reversing unless you make them independent. All function outputs have FX generators for prototypical lighting effects and have qualifiers for FX effects and qualifiers for standard on/off functions. All Digitrax Series 3 decoders have FX³ type functions. FX³decoders offer full function mapping so you can choose which function (F0-F12) controls each function lead. FX³decoders offer master light switch capability. FX³ decoders offer qualifiers for FX function operation qualified by one of the following: the loco's direction of travel, whether F0 is on or off, loco direction and F0, or whether the loco is moving or not. These qualifiers are also available on function outputs that are used as standard on/off functions.
Features	Series 6 Compatible with Digitrax PX series Power Xtenders to keep locos and sound running in the presence of dirty/poor track work.* FX³ outputs optimized for both LED and bulb applications. FX³ outputs have configurable pulse available on all outputs. Improved Scaleable Speed Stabilization (Back EMF).
Current Rating-Functions	0.5 Amps total all functions
Original Release Date	02-04-2014
Warranty	Digitrax gives a one year "No Worries"Warranty against manufacturing defects and accidental customer damage on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.

In the model railroad business since 1998

Digitrax DH166D 1.5 Amp HO Scale Wired Mobile Decoder

$24.00

Digitrax gives a one year "No Worries"Warranty against manufacturing defects and accidental customer damage

on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.