Board replacement decoder for Atlas N-Scale GP40-2, U25B, SD35, Trainmaster, B23-7 and others
Golden-White LEDs for added realism
Decoder Lock equipped
|Current Rating-Motor||1 Amp Continuous/1.25 Amp Peak Rating|
|Size||0.374” x 3.0015” w/LEDs x 0.1570” (9.4996mm x 76.2381mm w/LEDs x 3.9878mm)|
These decoders are made to fit specific locomtoive chassis. Locomotives that have circuit boards that can have decoders installed in place of the original circuit board are made by many manufacturers.
In some cases, locomotive modifications, motor isolation and additional soldering may be required during installation of this type of decoder. Function leads can be added to these decoders using solder pads available on the decoder.
See the instruction sheet for the particular decoder you are using for specific instructions.
Sometimes these are called plug n' play or drop in decoders.
Digitrax Real FX3
Series 3 decoders with 6 functions have FX3 function outputs
SuperSonic motor drive for quiet operation (silent operation)
Support for all DCC programming methods as of the time of release
Operations mode read back capability for CV read back on the main line
Scaleable Speed Stabilization (Adjustable Back EMF)
One Step decoder Factory CV reset (CV08=8 or CV8=9 to preserve loadable speed tables)
Motor Isolation Protection
White or Golden Yellow LEDs on decoders that come equipped with LEDs
Series 3 decoders with less than 6 functions have a modified set of features
Digitrax gives a one year "No Worries"Warranty against manufacturing defects and accidental customer damage
on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.